; NOTE All text after the semicolon is ignored by the Tiny 2
;
; Below is a startup text you can use in Winpak. 
; If you have an old Tiny 2 mk1, to get it to use compressed forwarding etc, you will
; need to first of all set the Options/Comms screen in Winpak to 
; 7 bits, 1 stop and even parity.
; This will get the Tiny 2 to talk to Winpak. 
; Then send the tnc the below commands.  
; Alter the Options/Comms screen in Winpak to 8 bits, 1 stop and no parity. 
; Switch the  tnc off and back on again, and all should work well.
; If you have any problems, send a message to g4gsb on the web site.  
; 73 The MaxPak committee
;
;
; The title.
TITLE Startup
;wait until disconnected - just a precaution!
WAITDIS
;send just a <Return> and wait for the prompt.
;helps to get things going with some TNCs when
;they have been left connected to the radio and
;disconnected from the PC.
SEND
;wait for the prompt.
WAITFOR cmd:
;send the daytime string.
;this will have the tokens substituted.
SEND DAYTIME $YY$MM$DD$HH$NN$SS
;wait for the prompt.
SEND MY G9XXX ; (put your own callsign in place of g9xxx)
SEND 3 ON
SEND HOM GB7MAX ; (put your own local bbs in place of gb7max)
SEND ECHO OFF
;The next line is the connect text sent by your tnc to anyone who connects to you, 
;if the next command CMSG is ON
SEND CT Welcome! If no reply, leave me a message, send "/msg".Send "/help" for info on all other commands. 73 fred g9xxx ;(use your own name and callsign)
SEND CMSG ON 
SEND MS ON
SEND AWL 8
SEND PARITY 0
SEND 8 ON
WAITFOR cmd: